The production process of perforated metal mesh

Release date:[2016/7/24]     Hit Count:[]   

      Punching process begin in the precise mold design, and we believe that the quality of the mold to a large extent determine the quality of the product. We invest so much money in this respect in recent years that our moulds  making ability is improved obviously.

We have advanced CNC machine with high quality products, daily output can reach 2000 square meters, punching of sheet thickness in between 0.1mm-25mm.
From the whole board to cut into the size you need.

3、Cutting edge
If the board side of the production process is beyond the tolerance range of your requirements, our skilled technical staff can help you to remove the excess.

We can use the leveling machine to punch through the deformation of the punch plate to restore its original state. The thickness of the plate 0.8mm-12mm plate can be leveled.

The punching process requires the use of lubricants, but we also have a process of removing the oil that can remove the traces of its surface, so that the hole plate is clean.

6、Making molding and deep processing
In addition to the customer reservation, we can for you to provide a series of subsequent processing, including: leveling, cutting, marking, packaging, in addition to oil, to pierce, forming, annealing, painting, plating, welding, polishing, bending, rolling,etc.

7、Surface treatment
Punching, leveling and cutting process will lead to the surface of the plate with incomplete, but these incomplete of general industrial activities are acceptable. If you have special requirements, we will be through such as powder spraying or painting, electro galvanized, hot dip galvanized, anodic oxidation and other additional measures to prevent.

     This is our ZhengYang company with everything to the customer's demand as the primary.


 perforated metal meshperforated metal mesh